Open 24/7 · Kyle, TX

Leak Detection in Kyle, TX

A bill that makes no sense, a hiss in a quiet house or a stain with no source. Call any hour for leak detection in Kyle, TX. Same-day service is available.

Emergency? Call now, 24/7(737) 717-0737
Cutaway of a home showing the plumbing systemWater main and sewer main under the street, a water heater in the garage, a toilet, a kitchen sink, drain lines and the sewer line. Numbered hotspots link to services.Water mainSewer mainWater heater1Drains2Leaks and pipes3Sewer line4Toilets and fixtures5
  1. Check the meterAll water off, then watch the dial or flow flag for a minute.
  2. Note the cluesWarm floor, wet wall, noise, low pressure or a higher bill.
  3. The leak is locatedThe plumber pinpoints it before opening anything.
Why call us

Why locate the leak before anyone cuts anything

A guess means holes in drywall or a trench in the yard. Precise detection keeps the damage small.

  • The line is open all hoursLeaks run through the night. The phone is answered 24/7.
  • Same-day service is availableA leak you cannot see is checked the same day where the schedule allows.
  • Find it, then fix itLocating and repairing run through the same call, with no hand-off.
  • Non-invasive firstMeter checks, listening gear and pressure tests come before any opening.
  • A person answersDescribe the clues out loud and get a plan.
We vs others

Calling here against hiring a leak finder and a plumber separately

Six differences in how a hidden leak is handled.

UsOnion Creek PlumbingvsMany other plumbing companies
HoursOpen 24/7A leak that grows overnight does not wait for the morning.Weekday booking only
Reaching someoneOne number, a person answersSay what you hear, see and measure.A web form and a callback
How soonSame-day service is availableActive water damage goes ahead of routine jobs.A slot next week
Jobs handledLocate, open, repair and close up on one callNo handoff once the leak is found.A detector who stops at a report
Local knowledgeAware that Texas homes often sit on slabs, so some pipes run beneath the floorThat changes how a search is planned.A method chosen without thought for the foundation
Price clarityThe factors are listed here. Ask about pricing when you call.You know what shapes the cost before you dial.A flat figure no one explains

Based on what is typical. Individual companies vary.

How it works

From a suspicious bill to a pinpointed leak

Four steps, from your first call to knowing where the water is going.

  1. You call

    Any hour. Say what you noticed and when.

  2. You describe the clues

    Meter behaviour, bill change, noises, damp spots and where.

  3. Same-day service is available

    Active water takes priority. A quiet bill check can be scheduled.

  4. Isolate and locate

    The plumber tests sections of the system until the leak is narrowed to one spot.

Pricing

What decides the price of leak detection in Kyle, TX

A leak at a visible valve and a leak under a slab are very different searches. These five things set the cost.

How much of the system must be tested

One zone is quick. A whole house with several lines takes longer.

Where the pipe runs

In a wall, under a slab or in the yard, each needs a different method.

Equipment used

Listening gear, pressure testing, thermal imaging and a camera each add time.

Access to the area

Open attics and utility rooms are easy. Finished floors and tight walls are not.

Repair that follows

Finding it is one job. Fixing it is another. Ask about pricing when you call.

Have this ready for the call

  • The last two water bills
  • Where you see or hear signs
  • Whether the meter moves with all water off
  • Any irrigation or pool lines on the property

Ask about pricing when you call.

Call now, 24/7(737) 717-0737
Start here

The meter test you can do in two minutes

A moving dial means water is going somewhere

The water meter is the cheapest leak detector you own. Turn off every tap, appliance and ice maker. Make sure nobody flushes. Open the meter box and look at the leak indicator, which is a small triangle or star on most dials. If it spins with everything off, water is leaving the system somewhere. Note the reading, wait fifteen minutes with everything still off, and read it again.

If the meter moves, close the shutoff valve at the house and check again. If it stops, the leak is inside the house. If it keeps moving with the house valve closed, the leak is on the line between the meter and the house, which the water line repair page covers. Call about leak detection in Kyle, TX with those facts and the plumber begins half way to an answer.

The meter test
  1. All water off

    Taps, dishwasher, washer, ice maker, irrigation timer.

  2. Read the indicator

    A moving triangle or star means flow.

  3. Wait fifteen minutes

    Read the dial again and compare.

  4. Close the house valve

    Check if it still moves. That separates the yard from the house.

Four steps, no tools.
Methods

How hidden leaks are found without tearing things open

No single instrument finds every leak. The plumber starts with the cheapest test that rules out large parts of the system, then narrows it. The table shows what each method does and what it cannot do.

MethodWhat it detectsGood forLimit
Meter checkWhether any water is leaving the systemFirst step on any leakDoes not locate it
Pressure testPressure drop in an isolated pipe sectionSupply lines, hot or cold, in walls or under a slabNeeds the section sealed
Acoustic listeningThe sound of water escaping under pressurePinpointing a leak on a known lineBackground noise hides small leaks
Thermal imagingTemperature differences on surfacesHot water lines, wet insulationShows a patch, not an exact point
Moisture meterDampness in drywall, wood and flooringConfirming a wet areaDoes not tell source
Camera inspectionThe inside of drain linesDrain leaks, cracked sewer pipesOnly for drainage
Methods and their limits.

If the plumber finds the leak under the foundation, the slab leak repair page explains the repair choices. The guide on how to find a water leak in your house lists checks you can do first.

Where it hides

The usual places a leak turns up in Texas homes

Supply, drain and outdoor lines

Not all leaks are under pressure. A supply leak runs all the time the water is on. A drain leak shows only when water passes through. An outdoor leak may be irrigation, a hose bib or the main line from the meter. Each has its own signs, and knowing which kind you have shapes the search.

Many Texas homes are built on slabs, so some pipes run under the floor and some drains are buried beneath it. Hot summers put heat on attic lines and garage heaters. Occasional hard freezes can split an exposed hose bib or attic pipe, and the leak may only show after the thaw. None of this means your house has a leak. It means a methodical search covers the places where the house is built to hide pipes.

Where leaks hide
LocationTypical clueCommon source
Under the slabWarm floor, sound of water, high billHot or cold supply line
Inside a wallStain, soft drywall, musty smellJoint, valve or fixture connection
Ceiling below a bathroomBrown stain that grows after showersShower pan, drain or supply fitting
AtticStain on a ceiling, drip near the heaterHeater connection, supply line
YardSoggy ground, bright green stripMain line, irrigation, hose bib
Behind appliancesFloor swelling, damp cabinetSupply hose, ice maker line, drain hose
Clues and likely sources.
Where to look
Local water

Mineral crust: a clue you can see

Hard water leaves a signature

City of Kyle water tested 275 to 295 ppm of hardness in 2025, about 16 to 17 grains per gallon, which the City calls very hard. Where very hard water seeps from a joint or a valve stem, it dries and leaves white or tan crust. A crust ring around a shutoff valve, under a faucet or on the bottom of a supply line means a slow weep that has been going for weeks or months.

The same crust can hide a leak, because it sometimes seals a small drip for a while before it lets go. Look under sinks, behind the toilet and at the heater connections. Not every Kyle address is on City water, so the crust is a clue, not a rule. If you find it, mention it on the call.

Crust clues
  • White ring on a valve stemA weep at the packing nut.
  • Crust on a supply line fittingA slow drip at a compression joint.
  • Chalky streak down a tankMoisture at a heater connection.
  • Stained cabinet floorLong-term seepage from a fixture.
  • Rust at a shutoff valveOld valve starting to fail.
Hard water crust and what it hints at.
If water is flowing

What to do while the leak is active

  1. Find the main shutoff

    Near the meter or where the line enters the house. See how to shut off your main water valve.

  2. Switch off the heater power

    If the water heater may run dry, turn off its power or gas.

  3. Protect belongings

    Move rugs, boxes and electronics out of the wet area.

  4. Photograph the damage

    Pictures help with any claim, see the insurance guide.

  5. Stay clear of power

    Water near outlets or a panel is a shock hazard. Do not touch.

  6. Call

    Say whether the main is off and how fast the water was moving.

Water near electrical outlets is dangerous.

If water runs through a ceiling light or soaks an outlet, keep away and shut off the breaker only if you can reach it dry. Call right away.

Questions

Questions about leak detection

How do you find a hidden leak?
The plumber starts with a meter check, then isolates parts of the system with a pressure test. Listening gear and thermal imaging narrow the location. Moisture readings confirm wet areas. A camera helps with drain lines.
What should I do first about leak detection in Kyle, TX?
Turn everything off and read the meter, then read it again after fifteen minutes. If it moves, close the house valve and check again. Call and share what you saw, because it tells the plumber where to start.
How do I know if I have a slab leak?
Warm patches on the floor, the sound of water in silence, a high bill and low pressure are the usual signs. A pressure test and listening equipment confirm it. The signs of a slab leak guide has more.
How much does leak detection cost?
It depends on how much of the system must be tested, where the pipe runs, the equipment used and how easy the area is to reach. The repair after is separate. Ask about pricing when you call.
Why do some leak searches cost more?
A leak under a slab or behind finished walls needs more tests and more time. A leak at an exposed valve is quick. Larger homes and several water lines add work.
Can you come the same day?
Same-day service is available. An active leak goes first, and a quiet bill check can follow the same day or soon after.
Are you open overnight?
Yes. The line is open 24/7, holidays included. A person answers.
Is an irrigation leak part of leak detection?
Yes. Irrigation lines, backflow devices and hose bibs can leak more than a household fixture. Mention a sprinkler system on the call so it can be checked.
Will the plumber have to cut my wall?
Not before the leak is pinpointed. The goal is the smallest opening possible, or none if the leak can be fixed from an accessible side.
Can a small drip raise my bill a lot?
Yes. A slow leak runs all day, every day. Over a month it adds up, and it often does damage inside a wall before you see it.
What does a white crust on a pipe mean?
In very hard water, a slow weep dries and leaves minerals behind. City of Kyle water tested 275-295 ppm in 2025. Crust at a joint or valve means a leak that has been present a while.
Should I turn off the water at the main?
If water is flowing fast, yes. Close the main valve and call. If the leak is slow, the plumber may ask you to leave it on so it can be traced, so describe what you see.

Water going somewhere?

Call about leak detection in Kyle, TX at any hour. Same-day service is available.

Call now, 24/7(737) 717-0737